Ethernet Cables

Ethernet Cables

We offer a wide range of sizes of shielded Ethernet cables to use with our network equipped ConveyLinx and MotionLinx families of controllers.  These low cost Ethernet cables have been tested and approved for use with all of our controls.

Benefits
CONTACT US
  • Different sizes
  • Economical
  • Specifically for use with our controllers
  • Shielded

Card title

Card subtitle

Some quick example text to build on the card title and make up the bulk of the card's content.

Card linkAnother link
  • Reduces Cost and Saves Time
  • Super Compact Design
  • Deterministic Network
  • Collects Important Information
  • Robust M8 Connections
  • CE ETL UL and IP54
  • Modular & Simple Install

    A conveyor section powered by a single Pulseroller Senergy motor drive roller (MDR) is mechanically linked with just enough free-turning (gravity type) rollers to constitute a controllable zone. This zone is usually not much longer than the item to be conveyed. With the proper control system strategy, an end-user can easily assemble individual MDR zones like building blocks to make zero pressure accumulation conveyor subsystems. Instead of having a single 100-ft. accumulation conveyor with its 5HP, 480-volt gear motor, and its own air feed drop; you now have 10 manageable 10-ft. modular accumulation sections that connect together. You don't have to supply air piping, and your power sourcing can be as simple as plugging into a standard 120-volt household wall receptacle.

    Saves Energy 

    One of the greatest advantages of motorized drive roller conveyors is the fact that, with the proper control system strategy, MDR zones run just 10-50% of your operational time. Contrast this with conventional conveyors which typically run all the time whether they are accumulating product or not. This means you will enjoy significant energy savings with a Senergy MDR. Customers are seeing energy savings from 30 to 70%.

    Safer

    Our Senergy motorized drive roller is powered by 24 volts DC, and has no major pinch points. It provides just enough motive power and torque to control a short zone, and there is never enough drive power to be considered dangerous. In most cases, you can literally grab a running motorized roller with your bare hand and make it stop with only a handshake grip.

    Quiet

    Conveyor systems powered by Senergy MDRs are much quieter than conventional conveyors. They operate only when necessary and at a quiet 40dB.

    Truly Plug and Play

    The phrase "plug and play" has become ubiquitous in product marketing. Many companies and products promise you plug and play for obvious reasons, but in truth they fail to deliver the plug or the play. When you use Senergy and ConveyLinx together in your motorized drive roller conveyor systems, plug and play becomes a reality.

    Conveylinx and Senergy are installed with simple plug in style JST or M8 connectors. With our patented installation process the "play" in many cases, is as easy as pressing a button on the ConveyLinx card or via our EasyRoll software. Taking it a step further, when customizations are necessary, you simply plug in an Ethernet cable to connect ConveyLinx to your PC running EasyRoll. Simple as can be!

    Reduced Maintenance Costs

    It’s simple. Because our Senergy MDRs run only as needed, there's less wear and tear on components. We use sealed for life bearings, and most of our motors are interchangeable. This means you only have to stock one spare part.  

    -CE certified, RoHS compliant, IP54 raitng
    -ETL Certified to UL Standards (Optional)
    -Tube material:Mild stell, zinc plating/ Stainless steel (SUS304)
    -Roller diameter:48.6 mm (1.9"), 50.0 mm (1.97")
    57.0 mm (2.24"), 60.5 mm (2.38")
    -Min. roller length:Refer to the "Availale minimum roller length table" below
    -Max. roller length:1000 mm *Contact us for longer than 1000 mm.
    -Cable length:600 mm (SENERGY) / 1000 mm (SENERGY-Ai)
    *Contact us for extension cables
    -Motor Connector:JST (SENERGY) /M8-4pin (SENERGY-Ai)
    -Operation:0.5 sec ON / 0.5 sec OFF duty cycle (Minimum)
    or continuous within rated load

    Technical data

    ECO modeBOOST modeBOOST-8 mode
    VoltageDC24V
    Nominal Output40W50W50W
    Rated current 2.5A3.5A3.5A
    Starting current 3.0A5.0A8.0A
    Ambient temperature 14 ~ 140°F
    Ambient humidity 10 ~ 90% RH (No condensation)

    Characteristics data

    *Rated torque and rated tangential force of BOOST-8 are the same value as BOOST.*BOOST-8 performance is available with EZ-24HTB and ConveyLinx HTF card only
    Speed codeGear boxGear ratioECO modeBOOST & BOOST-8 mode
    Speed
    (f/min)
    Torque (in-lbf)Tangential force (lbf)Current (A)Speed
    (f/min)
    Torque (in-lbf)Tangential force (lbf)Current (A)
    RatedStartingRatedStartingRated (max)StartingRatedBOOST StartingBOOST-8 StartingRatedBOOST StartingBOOST-8 StartingRated (max)BOOST StartingBOOST-8 Starting
    153 stage45.006.4 ~ 64.726.2145.027.4151.62.53.06.4 ~ 46.847.4189.1215.049.9197.7224.83.55.08.0
    2033.008.8 ~ 88.319.2106.220.1111.08.8 ~ 63.934.9138.4157.436.5144.7164.5
    2527.0010.7 ~ 107.815.787.016.490.910.7 ~ 77.928.6113.5129.029.9118.6134.8
    352 stage18.3315.8 ~ 159.010.659.011.161.615.8 ~ 115.019.476.987.420.380.491.4
    4515.0019.2 ~ 194.08.748.39.150.519.2 ~ 140.315.963.071.616.665.974.9
    6011.0026.3 ~ 285.06.435.46.737.028.3 ~ 191.611.646.152.412.148.254.8
    759.0032.1 ~ 323.25.229.05.430.332.1 ~ 233.89.537.843.09.939.544.9
    951 stage6.818242.3 ~ 426.73.921.94.122.942.3 ~ 308.67.228.632.57.529.934.0
    1255.0057.7 ~ 581.92.916.13.016.857.7 ~ 420.85.321.023.85.521.924.9
    1753.666778.8 ~ 794.92.111.82.212.378.8 ~ 574.83.815.317.44.016.018.2
    2153.0096.2 ~ 969.81.79.61.810.196.2 ~ 701.33.112.614.33.313.114.9
    • Robust and Unique Gearbox Design significantly improves life expectancy
    • Provides wide ranges of Speed and Power using Low Energy
    • JST Cabling for Simple Installation and Robust Cable Routing, IP54
    • CE Approved
    • ROHS Compliant
    • ETL Certified to UL Standards Available
    • IP54 & IP66 Ratings Available
    • ETL Certified to UL Standards Available
    • High Torque Rollers Available
    • Freezer and Wash-Down Rated Rollers Available
    • Mechanical Braking Available

    Use our contact page to be directed to the correct sales channel.

    Need help? Contact our product specialists TODAY!
    CONTACT US

    FROM THE BLOG

    FROM THE BLOG

    +1-800-764-6356
    sales@pulseroller.com

    PULSEROLLER © 2019 . Privacy Policy

    Newsletter

    Keep up with our always upcoming product features and technologies. Enter your e-mail and subscribe to our newsletter.