Senergy-IDC
Internal Drive Control

Internal Drive Commutation

Senergy-IDC places the commutation of the motor inside the motor housing so that control can be from most any compatible 3rd party module.

IDC technology is available in both Motor Roller and Pulse Gear Drive (PGD-IDC) configurations. No matter the configuration, Senergy-IDC provides industry leading 38W performance.

Senergy-IDC utilizes the same robust and reliable motor and gearbox construction used in all Senergy roller and PGD products.

The Senergy-IDC Motor Roller is a Drop-in replacement for most any internal drive motor roller that utilizes a standard 5-Pin M8 style connector.  Senergy-IDC will operate with ANY controller that operates a 5-Pin M8 motor roller including:

  • Pepperl+Fuchs G20 Series
  • Interroll MultiControl
  • Bihl+Wiedemann BWU Series

Senergy-IDC units follow the same engineering design, construction, and features as our flagship Senergy/Senergy-Ai products.

Senergy-IDC range and performance characteristics are suitable for speeds between 7 to 425 fpm and 38W of rated output power.

Senergy-IDC units operate at a low 40 dba, quieter than a typical conversation. They utilize a safe and effective 24VDC power supply and consume up to 70% less energy than alternatives.

Senergy-IDC units are directly compatible with any 3rd party controller that utilizes a 5-Pin M8 connector with the following configuration:

  • Pin 1: +24V
  • Pin 2: Direction
  • Pin 3: Gnd
  • Pin 4: Error
  • Pin 5: Analog Speed Reference
  • Drop in Replacement
  • Excellent longevity
  • Operates with Existing Controls
  • Brushless 24V DC motor
  • High overload capacity
  • High Acceleration Torque
  • 5-pin M8 standard connector

General Technical Data

  • Motor Cable Length: 500 mm (20”)
  • Motor Controller Connection: 5 Pin M8
  • Ambient Temperature: -10 ~ 40º C (14 ~ 104º F)
  • Ambient Humidity:10 ~ 90 RH (No Condensation)
  • Starting Current: ECO: 3,0A | BOOST: 5,0A | BOOST-8: 8,0A
  • Input Voltage: 24 VDC
  • Nominal Power Output: 38W
  • Rated Current: 2.4A
  • Starting Current: 3.0A
  • Maximum Motor RPM: 5800
  • Minimum Motor RPM: 580
  • Certifications: CE, UKCA, RoHS, IP54

Roller Drawings