EasyRoll Software- Advanced Drive Control

EasyRoll is the primary configuration tool for the high-end ConveyLinx controller. Quickly commission your system with a point and click of the mouse.  Enable great features using a checkbox or pull down menu only found in the ConveyLinx series of PULSEROLLER controls.

Just plug a PC into the first or last ConveyLinx card, execute the software, and effortlessly make whatever changes are needed such as motor speed, direction, ZPA mode, acceleration, deceleration, etc. Do more with EasyRoll such as diagnosing issues, backing up and restoring, individual or global changes to the entire system all with a click of the mouse. The EasyRoll software tool has the simplistic user interface that every engineer or maintenance man needs while commissioning a system.

Configuration Tools
Online configuration, maintenance, and monitoring of your entire system without worrying about files. Just connect and configure.

Diagnostic Tools
Monitor each card or your system for faults, voltage levels, Motor Roller Current, whether a sensor is blocked or cleared, and much much more.
Advanced Tools
Advanced tools to make changes to control ports, sensor settings and timers, firmware upgrades, backing up or restoring entire system or just a single card, and enable special features only found with ConveyLinx.

  • Quickly configure and diagnose
  • Global or individual adjustments
  • Simple point and click system commissioning
  • Backup and restore systems

Compatible Controls
  • ConveyLinx-ERSC Family
  • ConveyLinx-Ai Family
  • ConveyLinx-IO and ConveyNet-IP
Easyroll main page

Card title

Card subtitle

Some quick example text to build on the card title and make up the bulk of the card's content.

Card linkAnother link
  • Reduces Cost and Saves Time
  • Super Compact Design
  • Deterministic Network
  • Collects Important Information
  • Robust M8 Connections
  • CE ETL UL and IP54
  • EasyRoll
    • {{easyRoll}}
    • {{easyRoll_ai}}
    ConveyLinx Firmware
    • {{conveyLinx_firmware}}
    ConveyLinx-Ai2 Firmware
    • {{conveyLinx_ai2_firmware}}
    ODVA Certified
    • {{odva_certified}}

      Download it here.

      Simple to Use

      Just plug a PC into the first or last ConveyLinx card, execute the software, and effortlessly make whatever changes are needed such as motor speed, direction, ZPA mode, acceleration, deceleration, etc. The interface is simple and intuitive.


      • Provides access to monitor all motor performance and operational parameters
      • Provides ability to modify operational characteristics of the built-in ZPA functionality
      • Displays motor and operational status and error conditions
      • Displays motor and operational status and error conditions
      -CE certified, RoHS compliant, IP54 raitng
      -ETL Certified to UL Standards (Optional)
      -Tube material:Mild stell, zinc plating/ Stainless steel (SUS304)
      -Roller diameter:48.6 mm (1.9"), 50.0 mm (1.97")
      57.0 mm (2.24"), 60.5 mm (2.38")
      -Min. roller length:Refer to the "Availale minimum roller length table" below
      -Max. roller length:1000 mm *Contact us for longer than 1000 mm.
      -Cable length:600 mm (SENERGY) / 1000 mm (SENERGY-Ai)
      *Contact us for extension cables
      -Motor Connector:JST (SENERGY) /M8-4pin (SENERGY-Ai)
      -Operation:0.5 sec ON / 0.5 sec OFF duty cycle (Minimum)
      or continuous within rated load

      Technical data

      ECO modeBOOST modeBOOST-8 mode
      Nominal Output40W50W50W
      Rated current 2.5A3.5A3.5A
      Starting current 3.0A5.0A8.0A
      Ambient temperature 14 ~ 140°F
      Ambient humidity 10 ~ 90% RH (No condensation)

      Characteristics data

      *Rated torque and rated tangential force of BOOST-8 are the same value as BOOST.*BOOST-8 performance is available with EZ-24HTB and ConveyLinx HTF card only
      Speed codeGear boxGear ratioECO modeBOOST & BOOST-8 mode
      Torque (in-lbf)Tangential force (lbf)Current (A)Speed
      Torque (in-lbf)Tangential force (lbf)Current (A)
      RatedStartingRatedStartingRated (max)StartingRatedBOOST StartingBOOST-8 StartingRatedBOOST StartingBOOST-8 StartingRated (max)BOOST StartingBOOST-8 Starting
      153 stage45.006.4 ~ 64.726.2145.027.4151. ~ 46.847.4189.1215.049.9197.7224.
      2033.008.8 ~ 88.319.2106.220.1111.08.8 ~ 63.934.9138.4157.436.5144.7164.5
      2527.0010.7 ~ 107.815.787.016.490.910.7 ~ 77.928.6113.5129.029.9118.6134.8
      352 stage18.3315.8 ~ 159.010.659.011.161.615.8 ~ 115.019.476.987.420.380.491.4
      4515.0019.2 ~ 194.08.748.39.150.519.2 ~ 140.315.963.071.616.665.974.9
      6011.0026.3 ~ 285.06.435.46.737.028.3 ~ 191.611.646.152.412.148.254.8
      759.0032.1 ~ 323. ~ 233.89.537.843.09.939.544.9
      951 stage6.818242.3 ~ 426.73.921.94.122.942.3 ~ 308.67.228.632.57.529.934.0
      1255.0057.7 ~ 581.92.916.13.016.857.7 ~ 420.85.321.023.85.521.924.9
      1753.666778.8 ~ 794. ~ 574.83.815.317.
      2153.0096.2 ~ 969. ~ 701.33.112.614.33.313.114.9
      • Robust and Unique Gearbox Design significantly improves life expectancy
      • Provides wide ranges of Speed and Power using Low Energy
      • JST Cabling for Simple Installation and Robust Cable Routing, IP54
      • CE Approved
      • ROHS Compliant
      • ETL Certified to UL Standards Available
      • IP54 & IP66 Ratings Available
      • ETL Certified to UL Standards Available
      • High Torque Rollers Available
      • Freezer and Wash-Down Rated Rollers Available
      • Mechanical Braking Available

      Use our contact page to be directed to the correct sales channel.

      Need help? Contact our product specialists TODAY!




      PULSEROLLER © 2019 . Privacy Policy


      Keep up with our always upcoming product features and technologies. Enter your e-mail and subscribe to our newsletter.