Motor Extension Cables

We offer and assortment of sizes and types of extension cables. The low cost Ethernet cables have been tested and approved for use with all of our controls.

Easily extend your brushless DC Drives cable length with our molded extension cables. The molded side has a 9-pin female JST and the other end that connects to the controller is a 9-pin male JST connector. We offer a variety from .5 meter up to 2.5 meter. We have plenty in stock so please contact us today.

Different sizes
Economical
Specifically for use with PULSEROLLER controllers
Shielded

Card title

Card subtitle

Some quick example text to build on the card title and make up the bulk of the card's content.

Card link Another link

Reduces Cost and Saves Time
Super Compact Design

Deterministic Network

Collects Important Information

Robust M8 Connections

CE ETL UL and IP54

Drawings

- CAD Drawing
  Part Number: CACRSC-EXT-XXX
  Description: PulseRoller Motor Extension Harness drawing in DWG format. Typically used between any Motor Roller with 9 Pin JST type connecor to our ConveyeyLinx or IQZonz modules. Standard lengths are XXX = 50, 150, 150, and 200 cm
- PDF Drawing
  Part Number: CACRSC-EXT-XXX
  Description: PulseRoller Motor Extension Harness drawing in PDF format. Typically used between any Motor Roller with 9 Pin JST type connecor to our ConveyeyLinx or IQZonz modules. Standard lengths are XXX = 50, 150, 150, and 200 cm

Single Source for Your Cable Needs

We offer lengths from .5 meter up to 2.5 meter. These low-cost Ethernet cables have been tested and approved for use with all of our controls.

-CE certified, RoHS compliant, IP54 raitng
-ETL Certified to UL Standards (Optional)
-Tube material:	Mild stell, zinc plating/ Stainless steel (SUS304)
-Roller diameter:	48.6 mm (1.9"), 50.0 mm (1.97")
	57.0 mm (2.24"), 60.5 mm (2.38")
-Min. roller length:	Refer to the "Availale minimum roller length table" below
-Max. roller length:	1000 mm *Contact us for longer than 1000 mm.
-Cable length:	600 mm (SENERGY) / 1000 mm (SENERGY-Ai) *Contact us for extension cables
-Motor Connector:	JST (SENERGY) /M8-4pin (SENERGY-Ai)
-Operation:	0.5 sec ON / 0.5 sec OFF duty cycle (Minimum) or continuous within rated load

Technical data

	ECO mode	BOOST mode	BOOST-8 mode
Voltage	DC24V
Nominal Output	40W	50W	50W
Rated current	2.5A	3.5A	3.5A
Starting current	3.0A	5.0A	8.0A
Ambient temperature	14 ~ 140°F
Ambient humidity	10 ~ 90% RH (No condensation)

Characteristics data

*Rated torque and rated tangential force of BOOST-8 are the same value as BOOST.
Speed code	Gear box	Gear ratio	ECO mode							BOOST & BOOST-8 mode
			Speed (f/min)	Torque (in-lbf)		Tangential force (lbf)		Current (A)		Speed (f/min)	Torque (in-lbf)			Tangential force (lbf)			Current (A)
			Speed (f/min)	Rated	Starting	Rated	Starting	Rated (max)	Starting	Speed (f/min)	Rated	BOOST Starting	BOOST-8 Starting	Rated	BOOST Starting	BOOST-8 Starting	Rated (max)	BOOST Starting	BOOST-8 Starting
15	3 stage	45.00	6.4 ~ 64.7	26.2	145.0	27.4	151.6	2.5	3.0	6.4 ~ 46.8	47.4	189.1	215.0	49.9	197.7	224.8	3.5	5.0	8.0
20		33.00	8.8 ~ 88.3	19.2	106.2	20.1	111.0			8.8 ~ 63.9	34.9	138.4	157.4	36.5	144.7	164.5
25		27.00	10.7 ~ 107.8	15.7	87.0	16.4	90.9			10.7 ~ 77.9	28.6	113.5	129.0	29.9	118.6	134.8
35	2 stage	18.33	15.8 ~ 159.0	10.6	59.0	11.1	61.6			15.8 ~ 115.0	19.4	76.9	87.4	20.3	80.4	91.4
45		15.00	19.2 ~ 194.0	8.7	48.3	9.1	50.5			19.2 ~ 140.3	15.9	63.0	71.6	16.6	65.9	74.9
60		11.00	26.3 ~ 285.0	6.4	35.4	6.7	37.0			28.3 ~ 191.6	11.6	46.1	52.4	12.1	48.2	54.8
75		9.00	32.1 ~ 323.2	5.2	29.0	5.4	30.3			32.1 ~ 233.8	9.5	37.8	43.0	9.9	39.5	44.9
95	1 stage	6.8182	42.3 ~ 426.7	3.9	21.9	4.1	22.9			42.3 ~ 308.6	7.2	28.6	32.5	7.5	29.9	34.0
125		5.00	57.7 ~ 581.9	2.9	16.1	3.0	16.8			57.7 ~ 420.8	5.3	21.0	23.8	5.5	21.9	24.9
175		3.6667	78.8 ~ 794.9	2.1	11.8	2.2	12.3			78.8 ~ 574.8	3.8	15.3	17.4	4.0	16.0	18.2
215		3.00	96.2 ~ 969.8	1.7	9.6	1.8	10.1			96.2 ~ 701.3	3.1	12.6	14.3	3.3	13.1	14.9

Robust and Unique Gearbox Design significantly improves life expectancy
Provides wide ranges of Speed and Power using Low Energy
JST Cabling for Simple Installation and Robust Cable Routing, IP54
CE Approved
ROHS Compliant
ETL Certified to UL Standards Available
IP54 & IP66 Ratings Available
ETL Certified to UL Standards Available
High Torque Rollers Available
Freezer and Wash-Down Rated Rollers Available
Mechanical Braking Available

Use our contact page to be directed to the correct sales channel.

Need help? Contact our product specialists TODAY!

FROM THE BLOG

The Weird Christmas Year Part 3 - The Final Chapter

01/18/2024

Continued from Part 2...Dec 26th-Dec 29th:? My daughter had to work all week beginning on the 26th, so I was stuck at her apartment with no car and no good idea on what to do. My wife did make it on the 26th and took an Uber from LAX, so then we were both stuck. The all Star Trek channel helped, but it was not really “something to do”.

The Weird Christmas Year Part 2

01/18/2024

Continued from Part 1...Fast Forward to the week Dec. 17th:? My poor wife is coughing like Marge Schott’s chain smoking Christmas goose.? She tests positive for COVID, I test negative.? My wife is known in our neighborhood as the “crazy walking lady”: she gets in her 5 to 10 miles almost every day - winter included.?

The Weird Christmas Year Part 1

01/17/2024

Astute followers of this column will remember that I have often given anecdotes and such from a conveyor PLC programmer’s perspective because I spent many years doing that kind of work.? As I have heard it said, you write about what you know.? Another little detail of this work is that 99% of the time you have to spend multiple days out of town

"What I Want for Christmas"

08/11/2023

With the August heat bearing down on us, I thought it might be nice to think about the holiday season if anything but to provide thoughts of lower temperatures and perhaps snow on the ground. Speaking of the holiday season; I assume that every reader of this column has seen the holiday classic film “A Christmas Story” so many times that all

Experience Unmatched Power with the NEW Senergy-Ai-48 Motorized Drive Roller

08/07/2023

We are excited to announce the release of our latest innovation, the Senergy-Ai-48 (48V) Motorized Drive Roller! Built on our industry-leading Senergy technology, this new roller offers unparalleled torque, speed, and acceleration to enhance your material handling operations.

ProMat 2023 - Lessons Learned

05/10/2023

Much like the migratory creatures of our animal kingdom, those of us in the material handling world make our biennial pilgrimage to Chicago to attend and/or present at the ProMat show. It was different this year because there was no in-person show in 2021, thus whether we admit it to ourselves or not, I believe a lot of us were itching to go to

Reason #6 to Visit PULSEROLLER in Booth #S1991

03/19/2023

Our NSF Certified Wash-Down Rated MDRs and Idlers. Reduce downtime needed to clean and sanitize!

Reason #5 to Visit PULSEROLLER in Booth #S1991

03/17/2023

Our New Senergy-IDC is Drop in Compatible with Many 3rd Party Motor Controllers.

Reason #4 to Visit PULSEROLLER in Booth #S1991

03/17/2023

Our New Raptor Motorized Drive Roller is the Future of MDRs!

Reason #3 to Visit PULSEROLLER in Booth #S1991

03/15/2023

Our New EZ-QUBE Wireless-Ai Controller Allows You to Configure Module Settings Via Bluetooth.

Reason #2 to Visit PULSEROLLER in Booth #S1991

03/13/2023

Our New Senergy-Ai-48 (48V) Motorized Drive Roller Gives You Added Torque, Speed, and Acceleration!

Reason #1 to Visit PULSEROLLER in Booth #S1991

03/13/2023

Our new EZ-QUBE-HTBF Controller adds Senergy BOOST and BOOST 8 performance modes and is freezer rated!