ConveyLinx

Simplified complexity.

Pulseroller ConveyLinx was the first Ethernet based networked motor roller conveyor controller when it was released over a decade ago and today it still provides the standard upon which others are measured. ConveyLinx provides automatic push-button installation and configuration for fast and simple installation and commissioning of motor roller conveyor systems.

Out of the box, ConveyLinx provides automatic zero-pressure accumulation (ZPA) conveyor control. Using Pulsroller’s complimentary EasyRoll software, you can customize and configure the built-in ZPA functionality to your application. With ConveyLinx working in ZPA mode, you can also connect your PLC with a simple interface to receive status as well as control product flow without having to write logic code to make the conveyor operate.

You can go a step further and change ConveyLinx to suspend ZPA operation and use it as a true remote drive control to your PLC network where your PLC logic can direct all of the modules’ functions.

Each ConveyLinx module has the ability to communicate withEthernet I/P, Profinet I/O, Modbus TCP, and CC-Link IEF Basic protocols.

ConveyLinx-HTF model provides BOOST-8 performance capability as well as being freezer rated down to -30°C (-22°F).

ConveyLinx-E and ConveyLinx-E-HTF models are ETL marked versions that are Listed to UL specifications 61010-2 and UL 61010-2-201.
  • Small footprint for easy installation in side frame
  • 4 Ethernet protocols
  • Control of all motion on conveyor
  • High flexible application
  • Significant reduction of PLC source code
    Fast module replacement
  • CE Certified, RoHS Compliant. IP20
  • Option for ETL Listed (UL 6101-2 & UL 61010-2-201)
  • Provides control for 1 or 2 Zones
  • Auto detection of PNP or NPN sensors and light/
    dark operate when configured for ZPA control
  • Single push-button Auto-Configuration
  • 3-Port Ethernet switch with standard RJ-45 ports
  • 9 Pin JST style header socket for motor connection
  • Thermal and overload motor protection
  • 4 RJ-11/12 ports for easy plug and play connections
  • 8 Tri-colored context sensitive LED indicators
  • Simultaneously recognizes Ethernet I/P, Modbus
    TCP, and Profinet I/O protocols on the same controller
  • Motor and ZPA adjustments accessible with
    EasyRoll Software
  • User programmable functionality available with
    ConveyLogix Software

General Technical Data

  • Voltage: 21 to 28 VDc
  • Rated Motor Output Current: 2.5A x 2 (ECO), 3.5A x 2 (Boost & Boost-8)
  • Power Connection: Unpluggable 2 Pole screw terminal
  • Motor Connection: 9 Pin JST x 2
  • Available Starting Current: 3.0A x 2 (ECO), 5.0A x 2 (Boost & Boost-8), 3.0A x 2 (ECO), 5.0A x 2 (Boost), 8.0A x 2 (Boost-8)
  • Sensor & I/O Connection: RJ-11/12 x 4
  • Ambient Temperature: 0° ~ 40°C (32° ~ 104°F), -30° ~ 40°C (-22° ~ 104°F)
  • Ambient Humidity: 10 ~ 90% RH (No Condensation)
  • Network Connection: RJ-45 x 2
  • Vibration: 1G or less
  • Available Networks: Ethernet I/P, Profinet IO, Modbus TCP, CC-Link IEF Basic
  • Certifications: CE, ETL Listed to UL 61010-2 & UL 61010-2-20

Hardware Features

  • Provides control for 1 or 2 ZPA Zones or acts as an 8 In /2 Out Dual Motor control remote I/O unit to a PLC 
  • 3-Port Ethernet switch with standard RJ-45 ports for easy daisy chaining of network cables from controller
  • 9 Pin JST style header socket for motor connection
  • 4 RJ-11/12 ports for easy plug and play connections for sensors and interlock signals
  • 8 Tri-colored context sensitive LED indicators
  • CE Certified, RoHS Compliant, IP20 Environmental

Functionality Features

  • Single push-button Auto-Configuration from a single controller to configure up to 221 controllers on a network
  • Automatic control module replacement without external PC or software
  • Auto detection and configuration of single zone and 2 motors in one logical zone per controller
  • Auto detection of PNP or NPN sensors and light/dark operate when configured for ZPA control
  • Thermal and overload motor protection plus optional Proportional-Integral regulated motor speed control
  • Motor speed and ramp parameters and ZPA adjustments accessible with EasyRoll Configuration Software
  • Automatic Flex-Zone and jam detection recognition and recovery while in ZPA mode 

Integration Features

  • Recognizes Ethernet I/P, Modbus TCP, Profinet I/O, and CC-Link IE Field Basic protocols on the same controller
  • In PLC I/O Mode, can be used as remote motor and I/O control with most all Ethernet equipped PLCs
  • Motor speed and performance parameters can be dynamically controlled at run time with remote PLC
  • Automatically tracks data for each item on the conveyor in ZPA mode and can make data available to PLC
  • Custom programmable with ConveyLogix software to act as a stand alone controller or can be integrated with PLCs
  • Parameters and settings for multiple networks of controllers can be backed up, saved, and restored with EasyRoll

Drawings

ConveyLinx 3010-0000
Standard ConveyLinx, ConveyLinxE


ConveyLinx 3010-3000
Standard ConveyLinx-HTF, ConveyLinxE-HTF High Torque Freezer Rated

Mounting Bracket Drawings

BRKT-UNIV 0999-1002
Universal Mounting Bracket for ConveyLinx-ERSC / HTF / -E modules 

Software

EasyRoll

EasyRoll +

ConveyLogix