Accessories: The Conveyor Extras That Bring Peace of Mind

Conveyors take more than rollers and controllers.  Extension cables, power supplies, sensors and other accessories help your conveyor do what you need it to do for your business.

Fortunately, PulseRoller has a selection of accessories designed to speed up commissioning time and reduce the inevitable hassles involved with running a significant piece of equipment.

Breakout Boards

Breakout boards are for those situations when you need to access the input/output of the PulseRoller ConveyLinx controller system. The ERCS-SE breakout board provides a convenient way to access the input/output in the controller's sensor and control ports.

It also does much more in the background. It also will amplify the output signal up to 150ma. The input/output without the amplification only provides enough current to signal a programmable logic controller (PLC) that an output is present. With this breakout board, you can use the ports to also control motor starters, solenoids, stack lights, and more.

Motor Extension Cables

Sometimes your cable length needs to be just ... a … little ... bit ... longer. That's why PulseRoller has extension cables in lengths from .5 meter to 2.5 meters in four different sizes: 50 cm, 100 cm, 150 cm, and 200 cm.

Each molded cable is Ethernet-enabled to easily extend the cable length of your brushless DC drives. They also are tested and approved for use with all PulseRoller brand controls. The molded side has a 9-pin female jst and the other end that connects to the controller is a 9-pin male jst connector.

PulseRoller also offers a wide variety of shielded Ethernet cables and power distribution cables.

MDR|Power® Supply

MDR|Power is a pre-engineered power supply that affords an economical means of providing power to your PulseRoller control and roller products.

It offers a single power supply with multiple inputs and amperages.  MDR|Power modules are lockable, pre-wired to the power supply and terminals, and internally fused and protected.

An automatic overheat shut-off mechanism gives you built-in heat protection for the convection-cooled unit, and an alarm output ensures you know about any problems quickly. You can easily monitor the status of the module thanks to the clear, polycarbonate cover.

It's available in 480VAC 270, or 120VAC inputs with 10, 20, or 40 amps outputs.

Sensors

Why pay more for sensor features that you don't need on a zero-pressure conveyor? Yeah, PulseRoller doesn't think you should either, which is why it offers ConveySense®. ConveySense was designed to be an economical zone-sensing solution for accumulation conveyors. It features a sensing distance of nearly 5 feet. An NPN signal alerts you when parts are present. It's also designed for quick commissioning: The sensor also includes an RJ12 connector for quick connections to the controls architectures. The ConveySense comes in two options: diffuse or retro-reflective.

With PulseRoller accessories you can turn a standard, zero pressure accumulation, or advanced drive conveyor into a hassle-free zone.